Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 1.9.1 Repair or Replacement of Crankshaft Main Bearings To determine if repair is possible or replacement is necessary, perform the following procedure. See Figure 1-143. Figure 1-143 Flowchart for Repair or Replacement of Crankshaft Main Bearings 1.9.2 Removal of Main Bearing Shells The main bearing caps are numbered consecutively, indicating their respective positions. When removed, the bearing caps (and the bearing shells, if they are to be reinstalled) must always be reinstalled in their original position. 1. Drain the oil pan, refer to section 14.6.1and remove the oil pan to expose the main bearing caps refer to section 3.11.2. 2.

Remove the oil pump pickup and outlet pipes, and the oil pump. Refer to section 3.2.2. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-167