1.10 GEAR CASE COVER PRE-EXHAUST GAS RECIRCULATION (EGR) 2. Install two guide studs (J–36107) to the gear case. See Figure 1-165. 1. Front Gear Case Cover 4. Locating Dowel (Round) 2. Front Engine Lift Bracket 5. Locating Dowel (Diamond) 3. Front Gear Case Housing Figure 1-165 Gear Case Cover Guide Stud Location 3. Support the gear case cover with a suitable lifting device, using the front engine lift bracket. See Figure 1-163. 4. Position the gear case cover on the guide studs and slide it forward. Index the two dowels in the gear case. See Figure 1-165. 5. There are 34 bolts that secure the gear case cover to the gear case (including five for the fan support bracket).
Install them as follows: (Rev. 2005) All information subject to change without notice. 1-186 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION