SERIES 60 SERVICE MANUAL case, using a plastic hammer or fiber mallet to tap the thrust plate rearward in the gear case just enough to start it in the gear case. See Figure 1-213. Figure 1-213 Camshaft Thrust Plate Installation 12. Install the adjustable idler gear assembly to the gear case. Refer to section 1.30.3. Align the timing marks of the adjustable idler gear and camshaft drive gear. See Figure 1-214. 1. Camshaft Idler Gear 4. Bull Gear 2. Adjustable Idler Gear 5. Crankshaft Timing Gear 3. Camshaft Drive Gear Figure 1-214 Engine Gear Train Timing Marks All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-227