Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 9. Torque the six crankshaft pulley bolts to 182-210 N·m (134-155 lb·ft). Proceed in a clockwise direction until all bolts are torqued. 10. Install crankshaft pulley and hub assembly (if equipped with this pulley style). Refer to section 1.15.3 11. Remove the flywheel lock tool. 12. Install the pipe plug to the inspection hole in the flywheel housing. 13. Install the drive belts to the crankshaft pulley. Adjust the belt tensions to the specifications. Refer to section 14.6.9. 14. Install any other components that were removed for this operation. 15. Refer to section 12.7 for verification of proper crankshaft vibration damper installation.

All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-251