Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.15 CRANKSHAFT PULLEY NOTICE: Use care when installing the crankshaft pulley spindle as the vibration damper, which is slip fitted over a pilot diameter of the crank, may come off. If the damper is allowed to fall, internal damage to the damper will result. 6. Install the crankshaft pulley spindle over the guide studs, onto the crankshaft and against the vibration damper. The crankshaft pulley spindle may be installed in any position. See Figure 1-248. Figure 1-248 Crankshaft Pulley and Hub Assembly Installation with Spindle (Rev. 2005) All information subject to change without notice. 1-264 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION