Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.16 FLYWHEEL 7. Attach the flywheel lifting tool (J–25026) or some other suitable lifting device, to the flywheel. See Figure 1-253. Figure 1-253 Flywheel Removal 8. Attach a chain hoist to the lifting tool. 9. Loosen, but do not remove the last flywheel attaching bolt. 10. Remove the flywheel lock. FALLING FLYWHEEL To avoid injury from a falling flywheel when removing the last bolt, hold the flywheel against the crankshaft by hand to prevent it from slipping off the crankshaft. The flywheel is not doweled to the crankshaft. 11. Remove the last flywheel attaching bolt and scuff plate. (Discard scuff plate.) 12. Remove flywheel. (Rev. 2005) All information subject to change without notice.

1-270 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION