SERIES 60 SERVICE MANUAL 1.17 RING GEAR The steel ring gear, which meshes with the starting motor pinion, is shrunk onto the rim of the flywheel. 1.17.1 Repair or Replacement of Ring Gear Inspection of the flywheel indicated that ring gear replacement is necessary. See Figure 1-258. Figure 1-258 Flowchart for Repair or Replacement of Ring Gear 1.17.2 Removal and Cleaning of Ring Gear Precleaning is not necessary. Remove the ring gear as follows: 1. Using an acetylene torch, cut the ring gear 1/2 to 3/4 of the way through, without allowing the flame to touch the flywheel. 2. The uncut portion will now yield. Tap the ring gear to remove it from the flywheel.
All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-275