1.21 PISTON AND CONNECTING ROD ASSEMBLY 5. Position (stagger) the piston ring gaps properly on the piston at 90 degree intervals. See Figure 1-303 for diesel engines and see Figure 1-304 for natural gas engines. Figure 1-303 Piston Ring Positioning (Diesel) Figure 1-304 Piston Ring Positioning (Natural Gas) 6. Place the piston, dome down, in the bottom of the pan. Center the dome of the piston within the pan. 7. Coat the inside diameter of the ring compression tool (J–35598–A) liberally with clean engine oil from the pan. (Rev. 2005) All information subject to change without notice. 1-330 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION