Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL [c] One leg (the long one) of the tool has an inscribed line. Measuring with a dial indicator at this line of the tool, the gear lash measurement will be an exact 1:1 reading. Gear lash specifications are 0.051-0.229 mm (0.002 -0.009 in.). [d] If proper lash cannot be obtained, replace gear with a new part. Refer to section 1.33.2. [e] Remove the dial indicator. [f] Remove the tool from the water pump. [g] Inspect the water pump cover seal for cracks or splitting. Refer to section 4.2.3.1gear mounted or refer to section 4.3.3.1 for front mounted water pump. Replace seal if damage is found. All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-393