SERIES 60 SERVICE MANUAL 16. The camshaft gear pilot tool will remain in place, holding the camshaft drive gear in contact with the adjustable idler gear, to prevent accidental disengagement. This arrangement makes it unnecessary to re-time the gear train. NOTE: The camshaft gear can go out of time if the pilot tool is removed. 17. Slide the camshaft rearward to completely disengage the dowel from the hub. Lift out the camshaft. 18. Remove the lower camshaft bearing shells, and group them with the upper shells and caps for possible reuse. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-471