1.29 CAMSHAFT DRIVE GEAR 1.29.3 Installation of Camshaft Drive Gear Install the camshaft drive gear, hub and thrust plate as follows: 1. Coat the contact surfaces of the hub and camshaft thrust plate with clean engine oil. See Figure 1-448. 1. Woodruff Key 5. Groove, Seal 2. Hub, Camshaft Drive Gear 6. Dowel Hole, Camshaft 3. Drive Gear, Camshaft 7. Thrust Plate, Camshaft 4. Groove, O-ring Figure 1-448 Cross-Section of Camshaft Drive and Related Parts (Rev. 2005) All information subject to change without notice. 1-498 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION