1.31 ADJUSTABLE IDLER GEAR COMPACT GEAR TRAIN 1.31 ADJUSTABLE IDLER GEAR COMPACT GEAR TRAIN The adjustable idler gear is a straight-cut gear, mounted on a bushing pressed into the center of the gear, which in turn is supported on a stationary hub. The hub is secured to the gear case by a retaining plate, three bolt studs, and locknuts. One stud is pressed into the gear case from the rear, and the flanged locknuts are installed after the gear, hub and hub retaining plate are installed. See Figure 1-459. 1. Nut 5. Gear Case 2. Retaining Plate, Adjustable Idler Gear Hub 6. Stud Bolts 3. Idler Gear 4.Idler Hub Figure 1-459 Adjustable Idler Gear and Related Parts (Rev.
2005) All information subject to change without notice. 1-512 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION