1.32 BULL GEAR AND CAMSHAFT IDLER GEAR FOR THE COMPACT GEAR TRAIN 1.32 BULL GEAR AND CAMSHAFT IDLER GEAR FOR THE COMPACT GEAR TRAIN The bull gear and camshaft idler gear assembly is centrally located beneath the gear case cover. The larger bull gear is directly driven by the crankshaft timing gear. The bull gear directly drives all of the gear-driven engine accessories (except the oil pump), meshing with drive gears for the fuel pump drive, air compressor drive and power steering pump (if so equipped), water pump and accessory and alternator drive.
Figure 1-463 Series 60 Compact Gear Train Assembly The smaller camshaft idler gear is located behind the bull gear on the same carrier, and turns at the same speed as the bull gear. The camshaft idler gear drives an adjustable idler gear, mounted on a separate hub in the gear case. The adjustable idler gear drives the camshaft drive gear. The gear ratio of each gear in relationship to the crankshaft timing gear is shown directly below the gear title. See Figure 1-463. (Rev. 2005) All information subject to change without notice. 1-518 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION