Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 6. Remove the engine brake assemblies and the spacer bar. 1.36.3 Disassembly of Model 760, 765, or 770 Jake Brake Remove the control valve as follows: EYE INJURY To avoid injury from flying parts when working with components under spring tension, wear adequate eye protection (face shield or safety goggles). 1. Press down on control valve washer using an appropriate diameter rod to relieve spring pressure. See Figure 1-532. 1. Jake Brake Assembly 3. Snap Ring Retainer 2. Spring 4. Snap Ring Pliers Figure 1-532 Relieving Spring Pressure 2. Using retaining ring pliers, remove retaining ring. All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-595