Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL [c] Use a triangle-shaped machinist's scraper, coating the tool with a generous amount of grease. See Figure 1-562. Gently remove the raised burr until the surface is flush with the remainder of the bore. Figure 1-562 Removal of Slave Piston Bore Burr [d] Remove any remaining grease and debris using a soft cloth or paper towel. Most of the debris will be picked up by the grease. 1.36.7 Assembly of Model 790/795 Jake Brake Assemble Model 790/795 Jake Brake as follows: All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-629