SERIES 60 SERVICE MANUAL Manufacturers also test cylinders for resistance to rough handling and impact by dropping them from a certain height, hitting them with a heavy weight or gouging them. The cylinders are then cycled the equivalent of a million miles of operation. In the gunfire test, manufacturers test the resistance of a cylinder to fragmentation by shooting it. Cylinders have also shown their durability in crash tests featured in informational videos produced by the NGV Coalition and others. In these tests, cylinders are mounted in a vehicle that is then dropped from several feet. The cylinders come through unscathed, even though the car is demolished.
Commenting on cylinder safety, one industry expert notes that the science of designing safe pressurized cylinders is by no means new, and the safety record is excellent. For example, some 1.4 million cylinders have been used by firemen for more than 15 years with only two catastrophic accidents, he notes, and those cylinders, pressurized to 31,025 kPa (4,500 psi), are not mounted in a vehicle but carried on a person's back. 2.2.4 Fueling Safety When designing for safety, companies manufacturing fuel dispensers for compressed natural gas typically concentrate on two areas:
hardware and what engineers call the "fill routine." For example, some dispenser valves are designed to shut off the flow of fuel if needed or vent the gas away from the dispenser in a closed-loop return system. Dispensers also have what is called "driveway protection." If someone drives away while fueling, a breakaway device on the dispenser ensures that the hose won't rupture or topple the dispenser. By the way, the breakaway force, according to code, for compressed natural gas dispensers is about 195 vs.1112 N (44 vs. 250 lbs) for gasoline pumps.
To guard against overfilling or any other kind of uncontrolled fill, dispensers are designed to monitor, either mechanically or electronically, whether the vehicle is receiving the amount of fuel it should. If the fill pressure rises beyond a predetermined level, the dispenser shuts off automatically. By the same token, if there's no pressure or a sudden loss in pressure - as in the case of an aborted fill or a hose being cut, - it also shuts off. Natural gas fuel dispensers are designed to be as easy to use and as similar to conventional fuel dispensers as possible, with safety and convenience in mind. With a minimum of training, anyone who can pump gasoline can safely dispense natural gas.
2.2.5 Safety Training When it comes to dealing with any fuel, it is important that technicians and vehicle drivers learn about safety. Technicians working with liquid fuels have learned to keep them contained, keep them off their skin, and keep them away from any source of ignition. They have learned, too, what to do in the event of a spill or leak. In the same way, NGV technicians and drivers need to learn how to safely handle a gaseous fuel, natural gas. While working with a gaseous fuel that's under pressure may be no more inherently hazardous than working with a liquid fuel, it is different.
To do their jobs safely, your technicians and drivers need to know what the differences are and how to work with them. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-9