Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

2.2 VEHICLE SAFETY FOR THE NATURAL GAS ENGINE 2.2.6 Fueling Vehicles Unlike liquid fuels which are simply poured into a fuel tank, CNG fuel systems require a closed fuel dispensing system that allows the natural gas to flow into the fuel cylinder without leaking into the atmosphere. Such a system must use ANSI (American National Standards Institute) NGV1-standard fuel nozzles which will not allow the CNG to flow unless the nozzle is properly connected to the vehicle fuel inlet. Such a system will also comply with the NFPA (National Fire Protection Association) standards for fueling station construction and safety. The typical commercial natural gas dispenser looks a lot like a gasoline pump.

It has a hose that connects easily to the vehicle fuel inlet with a snap-type coupling device and a meter that indicates how much fuel has been pumped. Once the cylinders are full, the pump shuts off automatically. Most stations can fill fuel cylinders on a "quick fill basis" or on a "timed fill" basis. With a "quick fill" system cylinders can be filled in about five minutes. Stations with "timed fill" systems may take longer, depending on the number of vehicles being fueled and the size or capacity of the fueling unit. Many fleets operate their own timed fill stations because this allows them to fill their vehicles unattended at night. Home dispensers for natural gas are also available.

These are about the size of a window air conditioner and can be hooked up directly to the natural gas supply of the home. Home dispensers normally use the "timed fill" principle so a vehicle can be fueled overnight. (Rev. 2005) All information subject to change without notice. 2-10 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION