Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 2.3 N2 ELECTRONIC UNIT INJECTOR The N2 Electronic Unit Injector (EUI) is a lightweight, compact unit that injects diesel fuel directly into the combustion chamber. See Figure 2-2. 1. Spray Tip 11. Injector Body 2. Spring Cage 12. Plunger 3. Check Valve Cage 13. Upper O-ring Grooves and Seals 4. Spacer 14. Fuel Outlet Openings 5. Fuel Inlet Opening 15. Injector Nut 6. Fuel Supply Chamber 16. Lower O-rings Grooves and Seals 7. Poppet Control Valve 17. Flat Disk Check Valve 8. Solenoid 18. Injector Needle Valve Spring 9. Injector Follower 19. Needle Valve 10.

Injector Follower Spring Figure 2-2 N2 Electronic Unit Injector Cross-section The amount of fuel injected and the beginning of injection timing is determined by the ECM. The ECM sends a command pulse which activates the injector solenoid. The EUI performs four functions: Creates the high-fuel pressure required for efficient injection. Meters and injects the exact amount of fuel required to handle the load. Atomizes the fuel for mixing with the air in the combustion chamber. Permits continuous fuel flow for component cooling. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-11