Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL NOTICE: Extreme care should be used when handling an N3 EUI to avoid costly damage by dropping or otherwise mishandling the N3 EUI. NOTICE The N3 EUI must be removed from the cylinder head by applying force on the body surface as shown in Figure 2-33. Removal force must not be applied to any other area on the N3 injector. Figure 2-33 N3 Injector Removal Surface 4. Lift the injector from its seat in the cylinder head by inserting a pry bar under the hold down clamp and remove as a assembly both clamp and injector. See Figure 2-34. Figure 2-34 Removal of the N3 Injector All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-49