SERIES 60 SERVICE MANUAL 15. Position pump on fixture (J–38767–1) and insert lip of seal remover (J–1508–13) between the inner and outer oil seals. Tap the tool with a light hammer to drive the outer seal out of the pump body. See Figure 2-50. Discard the seal. Figure 2-50 Oil Seal Removal 16. Repeat the process removing the inner seal by placing the tool lip against the inside of the seal case. Discard the seal. 17. Unscrew and remove the relief valve plug and remove the relief valve plunger, spring and pin from the bore. 18. Remove the spacer from the relief valve plug. 19. Remove and discard the O-ring seal under the head of the plug. All information subject to change without notice. (Rev.
2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-67