SERIES 60 SERVICE MANUAL 2.34 FUEL PRESSURE SENSOR The Fuel Pressure Sensor (FPS) is installed into the secondary fuel filter. The FPS is not used in all applications. The FPS sends an electrical signal to the ECM telling it what the engine fuel pressure is at any given speed. On Series 60G engines with the high pressure fuel system the fuel pressure sensor is installed in a tee at the inlet to the low pressure regulator. See Figure 2-128. 1. Fuel Temperature Sensor 5. Air Inlet Elbow 2. PSV 6. Low Pressure Regulator 3. Fuel Mixer 7. Air Temperature Sensor 4. Throttle 8. Fuel Pressure Sensor 9.
Fuel Inlet Tee Fitting Figure 2-128 Fuel Pressure Sensor for Series 60G All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-203