Komatsu — INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)

MAINTENANCE PROCEDURE MAINTENANCE 2. After adding distilled water, tighten cap (1) securely. REMARK If distilled water is added to above the bottom of the sleeve, use a small hose or tubing to lower the level to the bot- tom of the sleeve. Neutralize the removed fluid with baking soda (sodium bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery maker. When it is possible to use indicator to check electrolyte level If it is possible to use an indicator to check the electrolyte level, follow the instructions given. LUBRICATE SWING CIRCLE (2 POINTS) 1. Lower the work equipment to the ground. 2.

Using a grease gun, pump in grease through the grease fittings shown by arrows. 3. After greasing, wipe off all the old grease that was pushed out. 256