MAINTENANCE MAINTENANCE PROCEDURE 5. Inspect the front and rear of the oil cooler fins (4), radiator fins (7), after-cooler fins (8), and condenser fins (9) for dirt, dust, dry leaves, etc. Blow them away with com- pressed air. Steam or water may be used instead of com- pressed air. 6. Check the rubber hose. Replace it with a new one, if the hose is found to have cracks or to be hardened by age. Also check the hose clamps for looseness. 9JH02667A 7. Remove cover (10) from underneath and dispose of the dirt, dust, dry leaves, etc., which have fallen on it. 8. Install the cleaned net (2) back to the its original place and secure it with screw (3). 9. Secure net (6) with screw (5).
9JH092668A CLEAN INTERNAL AND EXTERNAL AIR FILTERS OF AIR CONDITIONER SYSTEM If compressed air, high-pressure water, or steam hit your body directly, or they cause dirt or dust to be blown up, there is danger of serious injury. Use safety glasses, dust mask, or other protective equipment. NOTICE The interval for cleaning the filter is 500 hours, but if the machine is used on an extremely dusty jobsite, reduce the maintenance interval and clean the filter more frequently. REMARK If the filter is clogged, the air flow is reduced and a muffled sound can be heard from the air conditioner unit. CLEANING RECIRCULATED AIR FILTER 1.
Remove wing bolts (1) from the inspection window at the bottom rear left on the inside of the operator's cab, then take out the recirculated air filter. 2. Clean the filter with compressed air. If there is oil on the filter, or if the filter is extremely dirty, wash it in a neutral agent. After rinsing it in water, dry it thoroughly before using it again. If the clogging of the filter cannot be removed by blowing with air or washing in water, replace the filter with a new one. 263 WARNING