MOUNTING SYSTEM Use isolators for instruments, radiators, etc. attached to the top of the subbase to prevent damage caused by the vibrations that are transferred through the solid engine mounts. All mounting components must be strong enough to withstand the dynamic loadings associated with the application. Control the bending moment at the rear of the cylinder block by placement of the rear mount or cradle. 12.3 FLEXIBLE MOUNTING SYSTEMS Flexible mountings enable the supporting structure to be isolated from engine vibration.
In any flexible mounting arrangement, consider the following requirements; The selected mounts must be rated to support the static and dynamic loads calculated for each mount. The mountings should protect the engine from any stresses caused by flexing and distortion of the machine frame. All mounting components must be strong enough to withstand the dynamic loadings associated with the application. The mountings must isolate the application from engine vibration at all engine speeds. 12.3.1 FLEXIBLE MOUNT SELECTION The easiest method to obtain the correct resilient mounts is to contact one of the many manufacturers of resilient mounts.
They have computer programs that will come up with the right mounts for the application. However you still have to be prepared to furnish them the necessary information as follows: 1. Name and description of the application and usage anticipated. This includes: [a] Mobile [b] On-Highway [c] Engine Model [d] Number of Cylinders [e] Four-Cycle [f] RPM of Operation including idle speed [g] Configuration (In-line for DD Platform) [h] Firing Order [i] Crankshaft Arrangement [j] HP and Torque 2. Total weight of engine plus driven components or their individual weights. 3. Center of Gravity (CG), x, y, and z of each component individually or combined.
12-4 All information subject to change without notice. DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION