CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Standard machine functions Operation of the front end attachment Slow raise When the function “slow raise” has been selected, then the solenoid (Y85) is switched with a pulse signal of 80Hz and approx. 50% PWM (Pulse width modulation). At the same time, the returns valve (Y77) will be switched with 12 V DC. Due to the pulsed signal, the spool (H) is then operated, but only so much that the oil flows via restrictor in the spool and the lower ring channel. The restricted flow then passes the one way valve (732) and out to the ram via (A1) and the front end attachment is raised slowly. The rest of the oil flows back to the tank via the pressure relief valve (703).

Operation of the front end attachment Fast raise When the function “fast raise” is selected, then the solenoid (Y85) and the returns valve (Y77) are both switched with 12 V DC. The spool (H) is then pressed to its limits and the oil can flow via both ring channels. The full volume of oil then flows via the one way valve (732) to the ram via (A1) and the front end attachment is raised quickly. Pulse width Modulation (PWM) 03/2004 3-19