DD Platform EuroV Operators Manual 4. Check the engine for leaks. a. Check all hoses, hose clamps, and pipe unions on the engine for tightness. Shut down the engine and tighten them if necessary. b. Check the oil feed and return lines at the turbocharger for leaks. Shut down the engine and tighten them if necessary. 5. Shut down the engine. NOTE: If the engine operating temperature is below 60єC (140єF), the engine must be on a level surface and then shut down for 60 minutes for an accurate oil level reading. Otherwise, the engine must be brought up to an operating temperature of 60єC (140єF), parked on a level surface and then shut down for five minutes for an accurate oil level reading. 6.
Check the oil level using the oil dipstick. The oil level is measured using the crosshatch area on the dipstick. If the oil reading within the crosshatch area, then the oil is at the proper level for engine operation. 7. Check all the mounting fasteners on the engine for tightness. Checking the Coolant Level (Cold Check) Check coolant level as follows: 1. Ensure that all coolant plugs in the bottom of the radiator and on the radiator outlet pipe are secure and tight. 2. Check the coolant level. The cooling system is correctly filled when the coolant is between the full and low marks on the surge tank. All information subject to change without notice.
33 DDC-SVC-MAN-0209 Copyright © 2019 DETROIT DIESEL CORPORATION