Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, wear safety glasses and 3 - 179 STARTING ENGINE WITH B When starting the engine with a rubb Be c each coul er gloves. areful not to let the normal m other. This prevents sparks d ignite the hydrogen gas gi achine and problem machine con from generating near the battery w ven off by the battery.

Make sure that there is no mista ke in the booster cable connecti The f inal connection is to the eng ine block of the problem machine, spar ks will be generated when th is is done, so connect to a place a as p ossible from the battery. Whe n disconnecting the booster cable, take care not to bring the c in co ntact with each other or wit NOTICE size of the booster cable and clip should be suitable for the battery size. battery of the normal machine must be the same capacity as that of the engine to be started. k the cables and clips for damage or corrosion. sure that the cables and clips are firmly connected.

k that the work equipment lock levers and parking brake levers of both machines are in the LOCK position. k that each lever is in the NEUTRAL position. The size of the booster cable and clip should be suitable for the ba ttery size The battery of the normal machin e must be the same capacity as t hat of the engine to be started. Chec k the cables and clips for d Make sure that the cables and cli Chec k that the work equipment l ock levers and parking brake leve rs of both machines are in the LOCK position. Chec k that each lever is in the N If the machine is equipped with a battery isolator switch, turn the ba ttery isolator switch to the OFF position before connecting the b ooster cable.

This will prev ent damage to the electrical equip ment on t he problem machine.