Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

CHASSIS MODIFICATIONS 2-87 E URO C ARGO E URO 4 - 5 Repositioning Parts and Mounting Auxiliary Assemblies and Equipment 2.22 Repositioning Parts and Mounting Auxiliary Assemblies and Equipment Whenever, in the course of modifying the vehicle, it should become necessary to reposition assemblies such as the fuel tank, batteries or the spare wheel, such relocation is permitted provided that the functioning of these parts is not impaired and provided that the same type of connections as originally in use are re-employed. Their transversal location on the vehicle’s chassis may not, when their weight requires it, be changed radically.

In the case of vehicles not equipped with a spare wheel carrier, and vehicles in which the spare wheel carrier must be relocated, the spare wheel must be secured to a suitable wheel carrier which allows the wheel to be readily removed. To secure the spare wheel to the side of the vehicle with a support attached to the web of the side member, it is advisable to use a reinforcing plate on the inside or outside of the side member. The size of this plate must take into account both the weight of the wheel and the possible presence of other reinforcements on the side member (see. Figure 2.39).

Figure 2.39 91470 In order to limit the torsional stresses on the vehicle chassis, we recommend that the plate be fitted where there is a cross member, particularly in the case of heavy units. A similar procedure should be adopted when fitting additional units such as tanks, compressors etc. When positioning them, due consideration must be given to the distribution of the weights (see point 3.2). In any event, an adequate distance of their height from the ground must be ensured with due consideration given to the use of the vehicle. Any holes that are necessary for the relocation must be made on the web of the side member in accordance with the specifications given in point 2.3.

Holes already present must be made use of to the greatest extent possible. Repositioning Parts and Mounting Auxiliary Assemblies and Equipment Print 603.93.431 Base - July 2006 Revi - June 2007