Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

CHASSIS MODIFICATIONS 2-89 E URO C ARGO E URO 4 - 5 Transporting Dangerous Cargo 2.23 Transporting Dangerous Cargo Vehicles used to transport dangerous Goods - for instance inflammable materials or explosives - must be built in compliance with the safety specifications established for this type of transport by national or international regulations.

On the assumption that the Bodybuilder is aware of, and in compliance with, the particular specifications relative to this subject we would like to recall, nonetheless, that all vehicles crossing borders within Europe must be in compliance with the ”European Agreement on international transport of dangerous substances on roads” (ADR), now included in the specific EC Directive. For EuroCargo vehicles, optional n ° 2342 is available, (ADR) combined with optional n ° 6899 (Daily Tacho 2 Drivers for ADR/SIM). Optional n ° 2342 consists of:

- special electric isolator on chassis - isolator control switch in cab - emergency switch - protected electrical connections - polyamide wiring harness sheathing - ADR homologation plate - Operating instructions Note: when optional n ° 2342 is installed the centralised door locking is not available. 2.24 Retarder insulation A supplementary slow-down brake (e.g. of a parasite current electrical or hydraulic type) can be fitted on the transmission (separate fitting), but this must be authorised by IVECO. Installation on some vehicles can be carried out at our plants (as optional extra).

Later installation on these vehicles must match the original solution (as for brake manufacturer co-operation). In the remaining cases, the brake manufacturing firm workshops must carry out the installation in compliance with points 2.3, 2.8.8 e 2.21. of these instructions. The firm authorised to carry out the installation is responsible for correct operation, anchoring part size, good quality of work. The technical documentation needed for the installation can be requested from IVECO. The information on the electrical system of each model is given in the Workshop Manuals and can be obtained from the IVECO Service Network (see point 2.21).

Quando sia necessaria l’applicazione di ripari anticalore, la loro sistemazione dovra essere curata utilizzando materiali con caratteristiche idonee nel rispetto delle norme vigenti, garantendone l’efficacia. To cool hydraulic retarders, their connection with the engine cooling system is allowed provided that this does not entail exceeding the maximum temperature allowances for the original system coolant. Otherwise, a separate cooling circuit must be fitted. If it is necessary to install additional heat exchangers, their dimensions must be defined by the retarder manufacturer. Their positioning must not alter the functioning of the original cooling system of the vehicle.

Contact IVECO to optimise the installation. Transporting Dangerous Cargo Print 603.93.431 Base - July 2006 Revi - June 2007