Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-7 E URO C ARGO E URO 4 - 5 Fitting Box-bodies The attachment is carried out using the brackets arranged on the vertical web of the side members. If such brackets have not been provided by the Manufacturer, they must be installed according to the specifications given in point 3.4. In order to provide an adequate lengthwise securing when the brackets or clamps are used, it is good common practice to arrange a rigid joint (one on each side) on the rear overhang, using plates or bolts on the upper flange of the side member (see Figure 3.19 and Figure 3.20). Under no other circumstances may new holes be made in the flanges of the main side members.

In those instances in which the box-body uses supports that are raised above the subframe (such as cross members) it will be necessary to stiffen these supports in an appropriate manner in order to contain the lengthwise thrusts, as shown in Figure 3.2. Figure 3.2 91529 1 Subframe 2 Brackets 3 Securing anchorages For special builds when a reinforcing runner of limited height is needed, the subframe structure may be integrated with the body anchoring brackets matching the height of the whole longitudinal reinforcement runner (see Figure 3.3). In this case, rear wheel boxes may be fitted at the base of the fixture. Figure 3.3 91530 Print 603.93.431 Base - July 2006 Revi - June 2007