Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-8 E URO C ARGO E URO 4 - 5 Figure 3.4 refers to vehicles with 2 axles with equal loads on the rear axles. Figure 3.4 Positioning on longitudinal plane 91517 L 1 = W 1 ⋅ L W or L 1 = L − W 2 ⋅ L W W = Fitting + payload (kg) W1 = Body and payload acting on the front axle (kg) W2 = Body and payload acting on the rear axle (kg) L1 = Distance of the center of gravity from the rear axle center line (mm) L = Wheelbase (mm) Example of calculation of the load’s center of gravity position Consider a ML120E18/P vehicle with a wheelbase of 4185mm, with 1. GVW = 12000kg (permitted maximum: 4400 kg on front and 8480 kg on rear) 2.

Kerb = 4220kg (2760 kg on front axle and 1460 kg on rear) The permitted maximum load (body + payload) will be W=12000-4220=7780 kg. Let us calculate the position of the center of gravity in which the maximum permitted on the front axle is achieved. Let us assume a unifor- mly distributed load. In this case, out of 7780 kg, W 1 =4400-276=1640 kg will act on the front axle, while the remaining W 2 =7780-1640=6140 kg will act on the rear axle. Thus: 1. W 1 = 1640kg 2. L = 4185mm 3. W = 7780kg L 1 = W 1 x L / W= 882mm The center of gravity of the load (body + payload) shall not be more than 882 mm far from the rear axle; other- wise, the front axle will be overloaded.

Base - July 2006 Revi - June 2007 Print 603.93.431