FITTING SUPER STRUCTURES 3-9 E URO C ARGO E URO 4 - 5 In order to apportion the payload on the axles, it must be uniformly distributed except when the shape of the loading surface itself entails a different distribution of the load. Regarding any equipment, the actual position of the centre of gravity must be used. When building bodies or containers, loading and unloading systems for the transported goods must be devised which preclude excessive variations in the distribution of the load and/or excessive loads on the axles. The relevant instructions should be given to the operators.
The bodybuilder will also need to install suitable payload securing systems on the body so that transport can be made with the utmost safety. Figure 3.5 Uniform distribution of the load Non-uniform distribution of the load due to the short rear overhang Uniform distribution of the load Non-uniform distribution of the load (beware of load on axles and of minimum ratio) 91518 Print 603.93.431 Base - July 2006 Revi - June 2007