Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-25 E URO C ARGO E URO 4 - 5 3.4.3 Connection with U-bolts (clamps) The most important mounting of this type is illustrated in Figure 3.18. In this type of construction the bodybuilder must place a spacing piece, preferably made of metal, between the flanges of the two side members at the point where the U-bolts are located, in order to prevent the bending of the frames when the U-bolts are tightened. In order to guide and to better contain transversally the structure that is attached to the vehicle’s chassis, this type of joint must be complemented by the addition of plates that are attached to the subframe and chassis as shown in Figure 3.20.

Figure 3.18 91480 1 Frame 2 Subframe 3 U-bolts 4 Locking with lock nut 5 Spacers 6 Cleat plate (where necessary) Print 603.93.431 Base - July 2006 Revi - June 2007