Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-26 E URO C ARGO E URO 4 - 5 Due to the nature of this type of mounting, its all-round use on the vehicle is not advisable. However, it is necessary - in order to keep the added structure from sliding, and to increase the rigidity - to provide positive attachment towards the rear with cleat plates to secure both longitudinally and transversally. For this purpose it is also possible to use bolt-type connections at the rear end of the chassis as illustrated in in Figure 3.19. Figure 3.19 1 Subframe 2 Frame 3 U-bolts 4 Longitudinal transversal securing anchoring.

91481 3.4.4 Connection made with Plates for Longitudinal and Transversal Securing Anchorage This type of anchorage shown in Figure 3.20 is achieved by means of a plate that is welded or bolted to the auxiliary frame and is secured to the chassis by means of bolts or rivets. This ensures regeneration following longitudinal and transverse thrust and provides maximum rigidity to the whole. Figure 3.20 91482 Base - July 2006 Revi - June 2007 Print 603.93.431