Base - July 2006 Revi - June 2007 Print 603.93.431 3-28 FITTING SUPER STRUCTURES EUROCARGO EURO 4 - 5 Volume weights 3.5 Volume weights When designing each installation, the volume weight of the material to be transported should be assessed beforehand. This data can be obtained from specialized manuals. Table 3.5 shows a few volume weight values provided as a guide.
Table 3.5 - Volume weights Material ρ (kg/m3) Iron 7890 Aluminium 2700 Concrete 1900-2300 Cardboard 350 Celluloid 1400 Powder cement 1400 Granite 2600 Wood (pine) 640 Marble 2500-2700 Excavated material 1600 Ordinary, dry brick 1800 Solid, urban wastes 90-120 (1) Dry sand 1600 Sand with 7% humidity 2100 Glass 2200-2700 (1) To be multiplied by the compacting ratio (approximately 5 for the compactors usually fitted to the EuroCargo range vehicles). 3.6 Fitting Box-bodies On standard cab vehicles, intended exclusively for road use, box- bodies are usually fitted on a support structure comprising longitudinal runners and cross members.
The minimum dimensions of the longitudinal runners are specified in Table 3.6. Table 3.6 Minimum reinforcing profile Model Wheelbase (mm) Strength modulus Wx (cm3) C-section profile (mm) 60E, 65E, 75E, 80EL up to 3690 21 80 x 60 x 5 60E, 65E, 75E, 80EL over 3690 26 100 x 50 x 5 80E, 90E, 100E up to 3690 26 100 x 50 x 5 80E, 90E, 100E over 3690 36 100 x 60 x 5 110EL(1), 120EL(1), 120E, 130E, 140E, 150E, 160E fino 3690 40 120 x 60 x 5 110EL(1), 120EL(1), 120E, 130E, 140E, 150E, 160E oltre 3690 46 120 x 60 x 6 180E, 190EL all 57 140 x 60 x 6 (1) = on the version with long cab, use a profile with Wx of not less than 57 cm3.
Material ρ (kg/m3) Aluminium 2700 Cardboard 350 Powder cement 1400 Wood (pine) 640 Excavated material 1600 Solid, urban wastes 90-120 (1) Sand with 7% humidity 2100