FITTING SUPER STRUCTURES 3-31 E URO C ARGO E URO 4 - 5 Tipping Bodies - For both under floor and front end tipping gear installations it is recommended that appropriate stabiliser acting as a guide for the stroke of the tipping body, are fitted. - The hinge of the liftingunit must be mounted on the subframe. The useful volume on thebodymustconform, with the consideration of the maximum permissible mass on the axles, to the density of the material that is to be transported (see point 3.5). When freight having a low density is transported, the useful volume may be increased within the limits established for the maximum height of the centre of gravity of the payload plus the fixtures.
- The bodybuilders must see to it that the functioning and safety of all parts of the vehicle (for instance, the positioning of lights, tow hook etc.) is safeguarded, in full compliance with the current safety regulations. Figure 3.21 91531 1 Subframe 2 Brackets 3 Plates 4 Butt strap Print 603.93.431 Base - July 2006 Revi - June 2007