FITTING SUPER STRUCTURES 3-32 E URO C ARGO E URO 4 - 5 3.9.1 Heavy-duty Service In Table 3.7 are listed the vehicles that are suitable for heavy-duty operations along with the minimum dimensions for the main subframe runners. Particular attention must be paid to the strict adherence to the general specifications given to ensure the vehicles have adequate stability in the rear tipping phases. When mounting tipping bodies on chassis provided with pedestal brackets or other types suitable for different types of bodies, the latter shall be replaced by shear/thrust resistant plates (cleat plates) from the rear spring front hanger bracket to the rear chassis or additional plates shall be fitted.
The rear frame overhang may have to be shortened, so that the maximum distance to the position of the tipping hinge complies with Figure 3.21. Table 3.7 - Minimum subframe profile dimensions TT = All wheelbase Base - July 2006 Revi - June 2007 Print 603.93.431 Minimum profile of subframe Strength modulus Wx (cm3) Dimensions (mm) Mo d el Wheelbase (mm) Yield limit of material used (N/mm2) 240 360 240 360 T T 39 ------ 120 x 60 x 5 80K, 90K, 100K T T 46 ------ 120 x 60 x 5 ------ T T 65 45 140 x 70 x 9 140K T T 89 53 160 x 70 x 7 120 x 70 x 6 T T 137 89 200 x 70 x 8 3690 89 ------ 160 x 70 x 7 ------ 180K 4815 105 ------ 180 x 70 x 7 ------ 100EW, 130EW T T 46 ------ 120 x 60 x 6 ------