Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

FITTING SUPER STRUCTURES 3-48 E URO C ARGO E URO 4 - 5 Figure 3.31 91537 1 Subframe 2 Plates 3 Brackets 4 Crane connections 5 Stabilisers 6 Angular connection elements Table 3.15 - Crane on rear overhang, solutions with combined section reinforcing profiles (see Figure 3.30) B C D Maximum reduction of height of profile (mm) 20 60 120 Example of combined profiles as alterna- tive to a 250x80x8 (mm) C-profile 200x80x8 160x80x8+ angular element 140x80x8+ angular element 3.13.3 Removable Cranes The installation of removable cranes on the rear overhang may be carried out according to the specifications of the preceding paragraph provided that the type of anchorage used between the crane and the subframe does not cause additional stress to the vehicle’s chassis.

In consideration of the fact that the vehicle may be used with or without the crane, we recommend recording on the body the position of the useful load consistent for the two types of operating condition. If the vehicle retains its ability to tow a trailer, all regulation concerning the proper coupling of the vehicle must be observed. Base - July 2006 Revi - June 2007 Print 603.93.431 R0,2 (N/mm2) 320 360 360 LV (see Figure 3.31) - 0.60 LG 0.65 LG Effective height reduction (mm) 12 52 64