Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

POWER TAKE-OFFS 4-16 E URO C ARGO E URO 4 - 5 4.6.3.1 Changing the torque curve, maximum rpm and the overrun regulator curve gradient The following can be limited to mechanically protect the PTO: − Maximum engine torque to protect against overloading (horizontal section of the curve in Figure 4.7) , as shown in Table 4.6. Table 4.6 - Torque limitation for PTO 1, 2, 3 for E.A.SY. − Maximum engine rpm to protect against overrun (slanted section of curve in Figure 4.7). This limitation is called ”runaway regulator”. Note: The use of the MODUS station must take place after an upgrade is run using E.A.SY.

software These limitations (maximum torque, intersection point, curve gradient) can be selected independently of each other. The combination of limitations is recommended. In this case, according to the envisaged PTO use, bodybuilders shall select the engine ratio limit (intersection point X) which must be made available to the selected torque. The overrun regulator trips when the engine ratio exceeds the intersection point X. Note that the reference speed is that of the crankshaft, not the PTO. The corresponding PTO rpm must be calculated by means of the PTO reduction ratio. Figure 4.7 Maximum torque [NM] Curve B Curve C Curve A Overrun regulator curve gradient:

Curve A ~0.65 CV/rpm Curve B ~1 CV/rpm Curve C ~2 CV/rpm Intersection point X Rpm [rpm] 91546 PTO management Base - July 2006 Revi - June 2007 Print 603.93.431 POWER rpm 95 kW (129 HP) 2700 110 kW (150 HP) 2700 125 kW (170 HP) 2700 134 kW (182 HP) 2700 154 kW (210 HP) 2700 176 kW (240 HP) 2700 202 kW (275 HP) 2500 TORQUE rpm 430 Nm (44kgm) 1200 - 2100 490 Nm (50kgm) 1200 - 2100 560 Nm (57kgm) 1200 - 2100 570 Nm (58kgm) 1200 - 2100 680 Nm (69kgm) 1200 - 2100 810 Nm (82kgm) 1200 - 2100 930 Nm (94kgm) 1200 - 2100 Values that can be set with E .A . SY.

1 level 200 Nm 200 Nm 200 Nm 200 Nm 250 Nm 250 Nm 250 Nm 2 level 250 Nm 250 Nm 300 Nm 300 Nm 400 Nm 450 Nm 450 Nm 3 level 300 Nm 300 Nm 400 Nm 400 Nm 500 Nm 600 Nm 600 Nm 4 level 350 Nm 400 Nm 500 Nm 500 Nm 600 Nm 750 Nm 800 Nm