Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

POWER TAKE-OFFS 4-24 E URO C ARGO E URO 4 - 5 Electrical system 4.7 Electrical system Figure 4.8 PTO SIDE AND REAR 1. PTO Relay - 2. PTO Solenoid - 3. Switch - 4. Gearbox switch - 5. Generator - 6. MET - 7. PTO engaged signal 115614 The vehicle’s system allows safe and reliable management of the power take-offs. The vehicle interface connectors are as follows: ST13 - 21 pin connector ST14 - 9 pin connector ST58 - 6 pin connector The EM (Expansion Module) control unit allows the electronic management of the following signals:

− Brake pedal status (pressed/not pressed) − hand brake status (engaged/not engaged) − clutch pedal status (pressed/not pressed) − pressure switch status (open/closed) − transmission status (idle/forward/reverse) − transmission position allowed − engine speed allowed − vehicle speed allowed − max. coolant temperature − Max. clutch sliding percentage If the customer requests the Expansion Module option 4572, the control unit is already included. The connectors in question are: ST13 - 21 pins PTO request ST16 - 6 pins ST12 - 20 pins ST60 (PTO1), ST62 (PTO2), ST63 (PTO3), 4 pins PTO IN/OUT For PTO provision, optional kits are available : 5439, 5194, 6368, 1483, 1484.

Electrical system Base - July 2006 Revi - June 2007 Print 603.93.431 P- TO rear P- TO side