Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

POWER TAKE-OFFS 4-25 E URO C ARGO E URO 4 - 5 Pneumatic system 4.8 Pneumatic system Take air from the auxilliers circuit to power the solenoid valve. 4.9 Isochronous control of engine rate − For vehicles featuring the Cruise Control. It is possible to adjust the engine r.p.m. during the power take-off phase. This occurs without a reduction in the engine r.p.m. during the take-off phase (isochronal regulation of the r.p.m.). The regulation is carried out via the ”Cruise Control” switches as follows: − On pressing the Resume button with the vehicle stopped, the engine rate automatically reverts to a pre-stored number of revs N res .

− Through the commands ”SET+ and SET-” it is possible to set the number of revolutions required. Figure 4.9 POWER TORQUE RPM / 1’ PROGRAMMABLE 91523 − Activating the ”OFF” button or pressing the brake pedal, clutch pedal or engine brake, the control function of the engine is disengaged. Pneumatic system Print 603.93.431 Base - July 2006 Revi - June 2007