Iveco — EuroCargo E4 BODYBUILDER INSTRUCTIONS

CHASSIS MODIFICATIONS 2-68 E URO C ARGO E URO 4 - 5 Taking Air from the System 2.20 Taking Air from the System Small quantities of air may be removed from the service tank to actuate auxiliary devices (such as a power take-off), provided that a control pressure value of 8.5 bar and limited return, which does not permit the drawing of air below that pressure, is inserted in the new take-off. Take the air directly from of the 4-way safety valve on the service line (outlet 24) located by the air reservoirs.A T-connector (e.g. IVECO detail n ° 98420917) can be used for this purpose (see Figure 2.29).

Figure 2.29 91507 If additional pneumatically powered units are installed, the demand on the compressor must not exceed 50% of its operating time. If larger quantities of air are required, a supplementary air tank must be fitted. However, in this case it will be necessary to verify that the standard air compressor is capable of filling the brake system tank in the specifically prescribed times. A compressor of greater capacity may have to be installed if necessary. Taking Air from the System Base - July 2006 Revi - June 2007 Print 603.93.431