Downloaded from https://www.everyspec.com MIL-HDBK-816 NOTICE 1 LN(X) - The natural logarithm of X. Please note that the argument of a logarithm can only be a pure number. Therefore, if the notation shows a logarithm of a variable that has a dimension (such as an ionizing radiation dose expressed in rads, for example), it should be understood that the argument has been made dimensionless by dividing it by a quantity having a value of one but with the same dimensions as the variable in question. Lot - The population of parts from which a sample has been taken. Lot acceptance test - The testing of a sample of parts from a lot to determine whether the lot is acceptable or not.
MEAN(X) - The arithmetic mean value of X. n MEAN (X) = 1/n Σ X i i = 1 n e.g. MEAN [PAR (RAD)] = 1/n Σ PAR i (RAD) i = 1 GMEAN(X) - The geometric (or logarithmic) mean value of X. n e.g. MEAN [LN (PAR (RAD))] = 1/n Σ LN (PAR i (RAD)) i = 1 GMEAN(X) = EXP(MEAN(LN(X))) e.g. GMEAN(PAR(RAD)) = EXP(MEAN(LN(PAR(RAD)))) n(lower case) - The number of devices in a sample of devices. N(upper case) - The number of lots in a sample of lots. Non-RHA devices - Parts that have not been tested with radiation or parts that fail the radiation test criteria. Standard devices - Parts that meet the criteria for military specifications or for Standard Microcircuit Drawings (SMD).
Nonstandard devices - Parts that do not meet the criteria for military specifications or for Standard Microcircuit Drawings (SMD). There are three types of nonstandard parts that are used for military procurement. They are as follows: a) Selected Item Drawings (SID), b) Source Control Drawings (SOCD), and c) Specification Control Drawings (SCD). Not-in-flux - Measurements made on a device when it is not being irradiated. OSTL - One-sided tolerance limit. P(upper case) - The probability that any part from a lot can pass the test conditions; also called the piece part survival probability. PAR i - The pre-rad parameter value measured for the i-th device.
PAR i (RAD) - The post-rad parameter value measured for the i-th device. Phi(spec) - The radiation level required in the device specification for lot acceptance tests. RAD - Equals 100 ergs of absorbed energy per gram. SUPERSEDES PAGE 7 OF MIL-HDBK-816 7