116 Saving Energy with Frequency Converters The energy required by such a system is proportional to the required torque and the speed of the motor. P ~ T x n If the speed can be reduced with a constant load as is the case in refrigeration cycles, one of the direct results will be energy savings. In other constant load applications, reduced speed will not have a huge impact. If, for example, the speed of a conveyor belt is reduced, the energy required to transport the goods from A to B stays approximately the same as the distance stays the same. Small savings are achieved through such factors as reduced frictional loss or optimised acceleration.
Nevertheless the use of speed control in constant torque applications is continuously increasing because of the benefi ts to the process itself. 4.7 Life Cycle Costs Potential ways to save energy can be found in almost all sectors, like building services, conveyor belt systems or chemical processes. Costs Disposal costs Energy costs Investment Operation and maintenance Time Fig. 4.17 Initial costs usually account for only approximately 10% of overall life cycle costs. The higher initial costs of an energy-saving device often pay for themselves in next to no time