117 Saving Energy with Frequency Converters 4.8 System Savings Regardless of whether the energy effi ciency of a new or existing process/machine shall be improved, the whole system must always be considered. Existing installations have the advantage that measurements can be made to determine the losses, creating a benchmark as to whether improvements to the system are working as expected Fig. 4.18 Overview of motor drive system with various accessories – illustrates a drive system operating a conveyor showing the majority of components which can be found in a drive system.
Mains filter (active/passive) Converter Mains Transformer Fuses Voltage drop Mains cables EMC filter Output filter (Sinus or dU/dt) Voltage drop Motor cable Mechanical transmission Motor Load / process / application Automation Fig. 4.18 Overview of motor drive system with various accessories The setup and the whole dimensioning of the system depend on the application (transmission, motor, output fi lter and motor cable) and its environment (EMC fi lter, output fi lters, cables, mains, climate, etc.). Therefore the engineering and the energy saving assessment should always start with the application assessment.
It makes no sense to select one or two highly- effi cient components if they have a negative impact on the system effi ciency. This is illustrated in the following example. Before deciding to make an investment, it is necessary to examine not only the technical, but also the commercial and logistical aspects, so that measures which are not cost-eff ective, or which are counter-productive, can be avoided or minimised. TCO (Total Cost of Ownership = total costs within a certain timeframe) and LCC (Life Cycle Costs = costs incurred within a lifecycle) are methods used for such an evaluation.
A life cycle cost analysis includes not only the procurement and installation costs, but also the costs of energy, operation, maintenance, downtime, the environment and disposal. Two factors – energy cost and maintenance cost, have a decisive eff ect on the life cycle cost.