139 Protection against Electric Shock and Energy Hazards • Otherwise, the equipment must be earthed using two separate PE conductors. This is often called ”reinforced earthing” Fig. 6.7 Waveforms and designations of residual currents Fig. 6.8 Universal RCCB 6.4 Fuses and Circuit Breakers For protecting FC’s and the installation against electrical and fi re hazard they need to be protected against short-circuit and over-current by means of an over-current protective device (e.g. fuse or circuit breaker). The protection needs to comply with relevant local, national and international regulations. A fuse interrupts excessive current, to prevent further damage to the protected equipment.
It is characterised by a rated current (the current that a fuse can A lternating fault currents P ulsating DCs (pos. and neg. half-wave) S A loping half-wave currents ngle of slope 90° el. 135° el. H alf-wave current with overlay of smooth fault DCs of 6 mA S mooth fault DCs