Mitsubishi — 3.7 Numbering and Functions of Counters [C]

3 Functions of Devices in DVP-PM Input pulse Pulse X0 U A PV of C200 Dir C200 X1 Input pulse B D M1200/M1201 Counting mode selection C200 reset signal M1203=1, X0+ z Counting mode of C204 is selected by M1204/M1205. Input signal of C204 is controlled by X2/X3. Reset signal of C204 is enabled by M1207 and triggered by X11. Input pulse Pulse X2 U A PV of C204 C204 Input pulse Dir D X3 B Counting mode selection M1205/M1204 C204 reset signal M1207=1, X11- z Counting mode of C208 is selected by M1208/M1209. Input signal of C208 is controlled by X4/X5. Reset signal of C208 is enabled by M1211 and triggered by X12.

Input pulse Pulse X4 U A PV of C208 Dir C208 X5 Input pulse B D M1209/M1208 Counting mode selection C208 reset signal M1211=1, X12- z Counting mode of C212 is selected by M1212/M1213. Input signal of C212 is controlled by X6/X7. Reset signal of C212 is enabled by M1215 and triggered by X13. DVP-PM Application Manual 3-14