3 Functions of Devices in DVP-PM DVP-PM Application Manual 3-23 OFF MANU AUTO Special Page Function 10M 20D 20M Attrib. Latched Default Ø Ø Ø D number ON AUTO MANU D1000* Scanning watch dog timer (Unit: 1ms) ○ ○ ○ 200 - - R/W NO 200 3-35 D1005 Display the firmware version of DVP-PM (initial factory setting) ○ ○ ○ # - - R NO # - D1002 Program capacity ○ ○ ○ 65,535 - - R NO 65,535 - D1003 Sum of the PLC internal program memory ○ ○ ○ - - - R YES 0 - D1008 Step address when WDT is ON ○ ○ ○ 0 - - R NO 0 - D1010 Current scan time (unit: 1ms) ○ ○ ○ 0 - - R NO 0 - D1011 Minimum scan time (unit: 1ms) ○ ○ ○ 0 - - R NO 0 - D1012 Maximum scan time (unit:
1ms) ○ ○ ○ 0 - - R NO 0 - D1020* X0 ~ X7 input filter (unit: ms) ○ ○ ○ 10 - - R/W NO 10 3-36 D1025 Error code of communication request error ○ ○ ○ 0 0 - R NO 0 - D1036* COM1 (RS-232) Communication protocol ○ ○ ○ H’86 - - R/W NO H’86 3-36 D1038* Delay time setting for data response when PLC is Slave in RS-485 communication. Range:0~3000 (unit: 10ms) ○ ○ ○ - - - R/W YES 0 3-39 D1039* Fixed scan time (ms) ○ ○ ○ 0 - - R/W NO 0 3-39 D1040 The cycle tme setting to synchronize with DVP-FPMC ○ ○ ○ 0 - - R/W NO 0 D1050 ↓ D1055 Converted data for Modbus communication data processing.
PLC automatically converts the ASCII data in D1070~D1085 into Hex data and stores the 16-bit Hex data into D1050~D1055 ○ ○ ○ 0 - - R NO 0 - D1056 CH0 present value of function card 2AD ○ ○ ○ 0 # - R NO 0 - D1057 CH1 present value of function card 2AD ○ ○ ○ 0 # - R NO 0 - D1070 ↓ D1085 Feedback data (ASCII) of Modbus communication. When PLC’s RS-485 communication instruction receives feedback signals, the data will be saved in the registers D1070~D1085. Usres can check the received data in these registers. ○ ○ ○ 0 - - R NO 0 - D1089 ↓ D1099 The sent data of Modbus communication. When PLC’s RS-485 communication instruction sends out data, the data will be stored in D1089~D1099.
Users can check the sent data in these registers.
○ ○ ○ 0 - - R NO 0 - D1109* COM3 (RS-485/RS232) Communication protocol ○ ○ ○ H‘86 - - R/W NO H’86 3-36 D1110 CH0 average value of function card 2AD ○ ○ ○ 0 # - R NO 0 - D1111 CH1 average value of function card 2AD ○ ○ ○ 0 # - R NO 0 - D1116 CH0 output value of function card 2DA ○ ○ ○ 0 - - R/W NO 0 - D1117 CH1 output value of function card 2DA ○ ○ ○ 0 - - R/W NO 0 - D1120* COM2 (RS-485) communication protocol ○ ○ ○ H’86 - - R/W NO H’86 3-36 D1121 DVP-PM communication address (latched) ○ ○ ○ - - - R/W YES 1 - COM2(RS-485) Residual number of words of NO D1122 ○ ○ ○ 0 0 - R 0 - transmitting data D1123 COM2(RS-485) Residual number of words of the ○ ○ ○ 0 0 - R NO 0 -