Руководство по эксплуатации Omron V107 NB-series Terminal (EN)

NB-series Programmable Terminals Setup Manual

NOTE All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Neverthe- less, OMRON assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in this publication. Trademarks • Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other countries for OMRON factory automation products. • Microsoft, Windows, Windows Vista, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • EtherCAT ® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. • ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA. • The SD and SDHC logos are trademarks of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. Copyrights Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Стр. 2

NB-series Programmable Terminals Setup Manual

NB-series NB3Q-TW  B NB5Q-TW  B NB7W-TW  B NB10W-TW01B Programmable Terminals Setup Manual Revised November 2019

Стр. 3

General Precautions

Introduction Thank you for purchasing an NB-series Programmable Terminal. NB-Series Programmable Terminals (PTs) are designed to handle information generated in FA production sites. Be sure to understand the functions and performances etc thoroughly before using PT correctly. Intended Audience This manual is intended for the following personnel, who must also have knowledge of electrical systems (an electrical engineer or the equivalent). • Personnel in charge of designing FA systems. • Personnel in charge of introducing FA systems into production facilities. • Personnel in charge of installing and connecting FA facilities.

• Personnel in charge of managing FA systems and facilities General Precautions • The user must operate the product according to the performance specifications described in the operation manuals. • Do not use the PT touch switch input functions for applications where danger to human life or serious property damage is possible, or for emergency switch applications.

• Before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems, machines and equipment that may have a serious influence on lives and property if used improperly, consult your OMRON representative. • Make sure that the ratings and performance characteristics of the product are sufficient for the systems, machines, and equipment, and be sure to provide the systems, machines, and equipment with double safety mechanisms.

• This manual provides information for connecting and setting up an NB-Series PT. Be sure to read this manual before attempting to use the PT and keep this manual close at hand for reference during installation and operation. 1 NB-series Programmable Terminals Setup Manual(V107)

Стр. 5

NB-series Manuals

NB-series Manuals NB-series manuals are organized in the sections listed in the following tables. Refer to the appropriate section in the manuals as required. Programmable Terminals Setup Manual (Cat. No. V107) (This Manual) 2 NB-series Programmable Terminals Setup Manual(V107) Section Contents Section 1 Part Names and Functions This section describes the names and functions of the various parts of an NB Unit. Section 2 Installing the NB Unit and Connecting Peripheral Devices This section describes the methods used to install the NB Unit and connect peripheral devices. Section 3 System Setting Mode This section describes the System Setting Mode.

Section 4 Calibrate Mode This section describes the Calibrate Mode. Appendices The appendices provide information on specifications, dimensions, wirings, and lists of the NB Units, the applicable PLCs and options. Programmable Terminals NB-Designer Operation Manual (Cat. No. V106) Section Contents Section 1 Introduction This section provides an outline of the NB-series PTs, including their functions, features, connection types and communication methods. Section 2 Installation and Startup of NB-Designer This section describes how to install and start the NB-Designer. Section 3 Functions of NB-Designer This section describes the functions of NB-Designer.

Section 4 Functions of NBManager This section describes the functions of NBManager. Section 5 Maintenance and Abnormality Handling This section describes the maintenance and check to prevent the abnormality occurrence and the handling of the abnormalities occurred in NB Unit. Section 6 Functions Related to External Memory This section describes the functions related to external memory. Section 7 Pictbridge Printing This section describes the Pictbridge printing function. Section 8 Web Interface This section describes the Web Interface function.

Appendices The appendices provide lists of the NB Units, the Communication Units, the applicable PLCs, the registers supported by PLC, and the list of NB- Designer functions.

Стр. 6