Omron — инструкции и руководства
Документов в разделе: 374
- NERLITE Smart Series DOAL Illuminator Configuration Guide
2 стр. · 19 просмотров
NERLITE Smart Series DOAL Illuminators Conf iguration guide Hardware Required 2 P/N 83-230018-02 Rev B Continuous Mode Continuous Mode With Dimming Or On-Off Control High Output Strobe Mode PART NUMBE
- QX Hawk Quick Start Guide
2 стр. · 30 просмотров
Important: When connecting Ultra-Lock cordsets to the QX Hawk and QX-1, align the pins first and then push the connector into place. Do not twist the connectors, as this will bend the pins. Important:
- QX Hawk Configuration Guide
2 стр. · 22 просмотров
QX Hawk Industrial Imager Configuration Guide Hardware Required Pin Assignments Note: Additional cordsets available in the Microscan Product Pricing Catalog. A is a serial M12 12-pin plug. It is the s
- QX Hawk C-Mount Quick Start Guide
2 стр. · 23 просмотров
Important: When connecting cordsets to the QX Hawk C-Mount and QX-1, align the pins first and then push the connector into place. Do not twist the connectors, as this will bend the pins. Important: Do
- QX Hawk C-Mount Configuration Guide
2 стр. · 23 просмотров
QX Hawk C-Mount Industrial Imager Configuration Guide Hardware Required Note: Additional cordsets and accessories are available in the Microscan Product Pricing Catalog and the QX Hawk Industrial Imag
- QX-870 Quick Start Guide
2 стр. · 25 просмотров
Important: If you are connecting Ultra-Lock cordsets to the QX-870 and QX-1, align the pins first and then push the connector into place. Do not twist the connectors, as this will bend the pins. Impor
- QX-870 Configuration Guide
2 стр. · 20 просмотров
QX–870 Industrial Raster Scanner Configuration Guide Hardware Required Note: Additional cordsets and accessories are available in the Omron Microscan Product Pricing Catalog. Pin Assignments QX-870 (B
- NERLITE Smart Series Pharmalite Illuminator Configuration Guide
2 стр. · 24 просмотров
NERLITE Smart Series Pharmalite Illuminators Configuration Guide Hardware Required P/N 83-230019-02 Rev C Part Number Description Continuous Current Strobe Current Continuous Mode Continuous Mode with
- PanelScan Integration Guide
34 стр. · 23 просмотров
PanelScan Integration Guide P/N 83-9111020-02 Rev E
- MS-9 Laser Scanner Quick Start Guide
10 стр. · 25 просмотров
Quick Start MS-9 Laser Scanner This guide is designed to get your scanner up and running quickly. When connected to a host computer with Windows™ operating system (2000 or above), you can use ESP (Eas
- MS-9 Laser Scanner Configuration Guide
1 стр. · 23 просмотров
This is the basic setup for a single MS-9 Laser Scanner and an MS-Connect 210 Connectivity Box. 61-000127-01 MS-9 to MS-Connect 210 cable, 6 ft. 97-100004-15 90-264 VAC, 24VDC, USA/Euro plug 99-000017
- MS-890 Quick Start Guide
2 стр. · 27 просмотров
Connecting the MS-890 Standalone • Attach the configuration cable ( 2 ) to the 9-pin (preferred) or 25-pin connector (on bottom of unit) to configure, test, and default the scanner. • Attach the power
- MS-890 Ethernet Connectivity Guide
2 стр. · 24 просмотров
Omron Microscan Systems, Inc . | 700 SW 39th St. | Renton, WA 98057 | Tel: 425.226.5700 | Fax: 425.226.8250 Technical Note MS-890 Ethernet Connectivity Guide This document describes how to transition
- MS-890 Configuration Guide
1 стр. · 19 просмотров
97-000012-02 plug A primary scanner is linked directly to the host computer. Secondary scanners are linked in tandem. Data is sent from each secondary scanner to the primary scanner, and from the prim
- MS-820 Industrial Bar Code Scanner Quick Start Guide
10 стр. · 27 просмотров
Quick Start Guide MS-820 Industrial Bar Code Scanner This guide is designed to get your scanner up and running quickly. When connected to a host computer with Windows operating system (98 or above), y
- MS-820 Industrial Bar Code Scanner Configuration Sheet
1 стр. · 25 просмотров
(1) MS-820 FIS-0820-XXXXG Industrial Laser Scanner (3) Reader Cable 61-000121-01 MS-820 to MS-Connect 210 cable, 3 ft. (4) Power Supply 97-100004-15 90-264 VAC, 24VDC, USA/Euro plug (5) Object Detecto
- MS-4X Series Quick Start Guide
2 стр. · 29 просмотров
MS-4Xi – Ethernet • Connect the M12 (power and I/O) end of the imager’s cable to the power supply ( 2 ). • Connect the RJ45 (Ethernet) end of the imager’s cable to the host. • Plug in the power supply
- MS-4Xi Configuration Guide
2 стр. · 21 просмотров
MS-4Xi Configuration Guide Hardware Required MS-4Xi Configuration Ethernet Standalone with QX-1 Ethernet Standalone 1 1 2 3 3 4 Ethernet Standalone with Flying Leads 1 5 MS-4Xi Pin Assignments Output
- MS-4X Configuration Guide
2 стр. · 25 просмотров
MS-4X Imager Configuration Guide Hardware Required Configurations Standalone (10-28V) Daisy Chain (10-28V) 2 2 2 1 1 1 8 9 3 3 9 3 6 5 6 6 5 Copyright ©2015 Microscan Systems, Inc. P/N 83-210444 Rev A
- MS-4 Quick Start Guide
2 стр. · 25 просмотров
Connecting by RS-232 / RS-422 • Connect the Imager ( 1 ) to the IB-3PC interface ( 2 ). • Connect the comm. cable ( 4 ) to the host ( 5 ) and to the host connector on the IB-3PC ( 2 ). • Connect power
- MS-4 Imager Configuration Guide
1 стр. · 24 просмотров
(2) IB-3PC FIS-0001-0030G Keyboard Wedge/Interface Box (3) IC-332 FIS-0001-0035G Voltage converter (to 10-28V) (4) Reader Cable MS-4 to MS-Connect 210 cable, 6 ft. 97-000012-02 90-264 VAC, 24VDC, USA/
- MS-2 Quick Start Guide
2 стр. · 22 просмотров
• When a connection is established, the green indicator in the status bar at the bottom right of the screen will be visible: 1 2 RS-232 Hardware Configuration or USB to activate the appropriate displa
- MS-2 CCD Reader Configuration Guide
2 стр. · 22 просмотров
MS-2 CCD Reader Configuration Guide Hardware Required Configurations USB (5V) Standalone (5V) Standalone (10-28V) 1 9 1 3 4 12 5 Important: USB models support USB 1.1 Keyboard Mode only. Virtual COM s
- MINI Hawk Series Quick Start Guide
2 стр. · 24 просмотров
MINI Hawk Xi – Ethernet • Connect the M12 (power and I/O) end of the imager’s cable to the power supply ( 2 ). • Connect the RJ45 (Ethernet) end of the imager’s cable to the host. • Plug in the power